For liquids, gases and steam up to 3600° F.
CIP/SIP-design, for sanitary use.
Polished version Ra<0.25, 0.4, 0.8 or 3.2 µm.
Mankenberg self acting pressure reducing valves are simple basic regulators that provide precision control and are easy to install and maintain.
They control the pressure at the outlet side without use of any external electrical or pneumatic actuators.
Pressure reducing valve 152 is a diaphragm-controlled, spring-loaded proportional regulator used mainly for sanitary applications in the food and beverage industries. It does not require the use of an external sense line.
These valves are made of deep-drawn stainless steel and feature excellent corrosion resistance. Standard surface roughness is Ra<3.2 µ m. they are virtually pocket-free and designed for use in CIP and SIP systems.
The spring module including the cover, spring, set screw, diaphragm and internals is fastened with 2 screws at the clamp for easy handling. Changing the diaphragm or the complete spring module for another pressure range is very easy and done without special tools or training. The valve remains in place in the line even for maintenance. Adjusting the set pressure does not change the height of the unit.
The spring keeps the valve in full open position when the pipeline is depressurized. Under pressure the medium flows from the inlet through the valve seat to the outlet and acts on the spring module. As the outlet pressure rises above the set pressure, the valve orifice becomes larger increasing flow. The pressure setting is adjusted by turning the set screw to change the spring tension.
|CONNECTION||INLET PRESSURE||OUTLET PRESSURE||CV-VALUE||TIGHTNESS|
1 1/4" is not possible with Tri Clamp.
Other connections on request
|Up to 116 psi||Up to 75 psi in 3 adjusting ranges||2.3-6 US gal/min||ANSI class III|